550.00———-Tubular Lower control arms

Installing the Church Boys Racing LLC. tubular lower control arms will give your classic Nova an immediate improvement in handling and predictability. Alignments can be done with ease with the use of the forward link adjuster, which enables you to adjust your caster and camber individually. Our teflon lined, Chromoly rod ends allow for unmatched range of motion.   Arms come complete with all necessary hardware and your choice of black or silver.

Your new CBR lower arms will come complete with New USA made components, Ball joints, eccentrics, and Rod ends.

1500.00——–CBR conversion kit

Update your worn out steering with this front mounted rack/pinion conversion. Your car will handle and feel like a newer car without all of the back and forth action of the steering wheel trying to keep you car between the ditches. Our kit will clean up your engine bay without having to deal with special oil pans, there will be no more linkage under the engine.

The Church Boys Racing LLC. rack/pinion conversion will simply bolt up using existing bolt holes. Not only does it bolt right up but it will add strength to the front subframe with the tubular cross member that replaces the factory unit.

******************Note**********************

This kit only includes the components made by CBR or the items made for CBR.

Components included in the kit:

Tubular cross member, Billet rack clamps, CNC made steering arms, Tubular Lower control arms, & 1-1/8 sway bar.

2200.00——–”COMPLETE”  CBR Conversion Kit

This kit includes everything needed to install the Church Boys Racing LLC. rack/pinion conversion into your car. All together in one package.

Includes an Ididit column w/accessories, CBR components and the steering linkage kit listed below.

2000.00 ——– Above kit without the Ididit Steering Column

1600.00———-Basic CBR rack/pinion conversion w/Ididit upgrade

Steering hookup, Ididit steering column, manual rack w/outer ends, billet clamps, tubular cross member, steering arms and rear mounted strut rods.

1400.00——-Basic kit without Ididit column

435.00———-Steering linkage kit

2 Borgeson joints, 18″ DD shaft, Manual rack, 2 outer tie rod ends

395.00———-Ididit steering column

Paintable, tilt column, floor support brkt. & wire harness

250.00———-Tubular Cross Member

1-5/8  .125 wall tubing powder coated Black or Silver

285.00———-Billet Rack Clamps

C-N-C machined from T-6061 aluminum

250.00———-Church Bar

1-1/8″ sway bar

350.00 ——– C-N-C Steering Arms

Prices can and will change without notice!